Stanford SR620 Frequency Counter

Time interval and frequency counter

Stanford Research

Distributed only in Germany
This is a discontinued product
More Information? Please contact us.
  • Overview

Key Facts

  • 25 ps single-shot time resolution
  • 1.3 GHz frequency range
  • 11-digit frequency resolution (1 s)
Down to Key Facts

Brief Description

The SR620 Time Interval Counter performs virtually all of the time and frequency measurements required in a laboratory or ATE environment.

Features & Benefits

Unlike conventional counters that only have numeric displays, the SR620 Frequency Counter provides live, graphical displays of measurement results.

Key Facts

  • 25 ps single-shot time resolution
  • 1.3 GHz frequency range
  • 11-digit frequency resolution (1 s)
  • Statistical analysis & Allan variance
  • Graphical output to XY scopes
  • Hardcopy to printers and plotters
  • GPIB and RS-232 interfaces
  • Optional ovenized timebase

Brief Description

The SR620 Time Interval Counter performs virtually all of the time and frequency measurements required in a laboratory or ATE environment. The instrument’s single-shot timing resolution and low jitter make it the counter of choice for almost any application.

SR620 Measurements

The SR620 measures time interval, frequency, pulse-width, rise and fall time, period, phase and events. Time intervals are measured with 25 ps rms resolution, making the SR620 one of the highest resolution counters available. Frequency is measured from 0.001 Hz to 1.3 GHz, and a choice of gates ranging from 1 period to 500 seconds are provided. The SR620 delivers up to 11 digits of frequency resolution in a 1 second measurement. It’s suitable for measurement applications ranging from short-term phase locked loop jitter, to long-term drift of atomic clocks. All measurement modes are supported by a wide variety of flexible arming and triggering options.

Features & Benefits

  • Histograms and Strip Charts

    Unlike conventional counters that only have numeric displays, the SR620 Frequency Counter provides live, graphical displays of measurement results. Graphical data is available in three formats: a histogram showing the distribution of values within a set of measurements, a strip chart of mean values from successive measurements, or a strip-chart of jitter (standard deviation or Allan variance) values from successive measurements. Up to 250 strip chart points, or histogram bins, can be displayed.

    Both histograms and strip charts can be displayed on any oscilloscope with an X-axis input (see the pictures above), or can be plotted on an HP-GL compatible plotter or dot-matrix printer. Convenient cursors allow you to read the value of any data point in the histogram or strip chart. Autoscale and zoom features make it simple to display all, or any portion, of the graphs.

  • Complete Statistical Calculations

    The SR620 Time Interval / Frequency Counter can make measurements on a single-shot basis, or calculate the statistics of a set of measurements. Sample sizes from one to one million can be selected. The SR620 will automatically calculate the mean, standard deviation or Allan variance, minimum and maximum for each set of measurements.

  • Reference Output

    A precision 50 % duty cycle square wave (1 kHz) is available at the front-panel REF output. The REF output can be used as a source of start or stop pulses for any of the SR620’s measurement modes. For instance, the length of a cable connected between REF and the B input can be precisely determined by measuring the time delay between REF and B.

  • Built-In DVMs and Analog Outputs

    Two rear-panel DVM inputs make measurements of DC voltages with 0.3 % accuracy (±20 VDC range). These values may be read via the interfaces or displayed directly on the front panel.

    Two rear-panel DAC outputs continuously provide voltages proportional to the mean and the jitter of the measurement sample. These 0 to 10 V outputs can drive strip chart recorders, or can be set to provide fixed or scanned output voltages.

  • Built-In Auto-Calibration

    A sophisticated, built-in auto-calibration routine nulls insertion delays between start and stop channels, and compensates for the differential nonlinearites inherent in analog time-measurement circuitry. The auto-calibration routine takes about two minutes to perform, and should be run every 1000 hours of operation.

  • 10 MHz Reference

    The choice of timebase affects both the resolution and accuracy of measurements made with the SR620. SRS offers a choice of a standard timebase with an aging coefficient of 1 × 10-6/year, or an optional ovenized-oscillator timebase with only 5 × 10-10/day aging, and about an order of magnitude better short-term stability than the standard timebase. A rear-panel input lets you connect any external 5 MHz or 10 MHz source as a timebase.

  • Computer Interfaces

    Standard GPIB (IEEE-488.2) and RS-232 interfaces allow remote control of the SR620 Frequency Counter. All instrument functions and configuration menu settings are accessible via the interfaces. A fast binary dump mode outputs up to 1400 measurements per second to a computer. A parallel printer port allows direct printing from the instrument. Standard IEEE-488.2 communications are supported, and plotter outputs are provided in HP-GL format. For convenient debugging, the last 256 characters transmitted over the interfaces can be viewed on the front panel.

Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Service Team

Feedback
Tell us your opinion
Please tell us which topic.
Please enter your inquiry.
Contact information

Please enter your first name.

Please enter a valid e-mail address.

Please enter your name.
Security Response Code
show captcha

The input was not correct.
*Mandatory Field
Contact Us
Request Information
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Service Team

Please enter your inquiry.

Please enter your first name.

Please enter your name.

Please enter a valid e-mail address.

Please enter your company name.

Please enter your city name.

Please enter your postal code.

Please enter your country.
show captcha
The input was not correct.
*Mandatory Field
Request a Quote
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Service Team

Please enter your inquiry.

Please enter your first name.

Please enter your name.

Please enter a valid e-mail address.

Please enter your phone number.

Please enter your company name.

Please enter your city name.

Please enter your postal code.

Please enter your country.
show captcha
The input was not correct.
*Mandatory Field
Request a Demo
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Service Team

Please enter your inquiry.

Please enter your first name.

Please enter your name.

Please enter a valid e-mail address.

Please enter your company name.

Please enter your city name.

Please enter your postal code.

Please enter your country.
show captcha
The input was not correct.
*Mandatory Field

Downloads
International Website